- 23 -
4.4.2.1.4 Password Configuration
Allow user to modify the password of SGSW-2620.
Figure 4-17 Password Configuration screen
Modify the password procedure:
1. Enter old password: empty (Default is admin)
2. Enter new password: * * * * * (New password)
3. Enter again: * * * * * (New password)
4. After setup completed, press “ESC” and choose “Save” to save the current configuration. Press
“ESC” and choose “Save” to save the current configuration. The screen in Figure 4-17 appears.
5. Press any key for return to previous menu.
@Notice: Up to 10 characters is allowed for the password.
4.4.2.1.5 Previous Menu
Return to Switch Configuration screen.
To Next Page
Loading...
