Planet WNAP-W2200 User Manual

User Manual of WNAP-W2200
-13-
Figure 4-1 TCP/IP Setting
Then click OK to save your settings.
Now, you can run the Ping command in the command prompt to verify the network connection between your
PC and the AP. The following example is on Windows 7 OS. Please follow the steps below:
1. Click on Start > Run.
2. Type “cmd” in the Search box.
Figure 4-2 Windo
ws Start Menu

Planet WNAP-W2200 Specifications

General

Brand	Planet
Model	WNAP-W2200
Category	Wireless Access Point
Language	English