EasyManua.ls Logo

Planmeca PlanMill 50 S - Consumable Spares; Maintenance Protocol; Filter Disposal; Troubleshooting

Planmeca PlanMill 50 S
132 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
A.4.4 Consumable spares
Unit Part number Description
iVAC eco+ 513002 0050 5 layer bag filter
A.4.5 Maintenance protocol
Unit serial number:
Prefilter
Date Name
….….….….….….….….….….….…. ….….….….….….….….….….….….
….….….….….….….….….….….…. ….….….….….….….….….….….….
….….….….….….….….….….….…. ….….….….….….….….….….….….
….….….….….….….….….….….…. ….….….….….….….….….….….….
….….….….….….….….….….….…. ….….….….….….….….….….….….
….….….….….….….….….….….…. ….….….….….….….….….….….….
….….….….….….….….….….….…. ….….….….….….….….….….….….
….….….….….….….….….….….…. ….….….….….….….….….….….….
….….….….….….….….….….….…. ….….….….….….….….….….….….
A.4.6 Filter disposal
Pre filters are manufactured from non-toxic materials.
Filters are not re-usable, cleaning used filters is not recommended.
Disposal of the used filters depends on the material deposited on them. For
more information, see the following table.
Deposit EWC listing* Comment
Non-hazardous 15 02 03 Can be disposed of as non-hazardous waste.
Hazardous 15 02 02 M The type of hazard needs to be identified and the
associated risks defined. The thresholds for these risks
can then be compared with the amount of material in the
filters to see if they fall into the hazardous category. If so,
the filters will need to be disposed of in line with the local/
national regulations.
* European waste catalogue
A.5 Troubleshooting
In the unlikely event of a problem with your extractor please contact your
local representative or:
Planmeca
Asentajankatu 6
FIN-00880 Helsinki
FINLAND
A.6 Technical specifications
Unit iVAC eco+
Appendix A: Suction unit (optional)
122 Planmeca PlanMill 50 S User's manual

Table of Contents

Related product manuals