System Maintenance14
You can perform several functions to keep your G7500 and Studio X series system running properly.
Unlock System Settings
Some settings in the local interface are locked by default. You can unlock these setting with your
system’s local administrator credentials.
1. From the far right border of the screen, swipe left and select Settings.
2. Select a setting with a Lock.
3. Enter your local administrator credentials to unlock the setting.
NOTE: Settings lock again if you exit the Settings screen, restart the system, or power off the
system.
Updating Software
You can update your G7500 and Studio X series system software a few different ways.
Use one of the following methods to update system software:
● Poly download server
● Custom server URL
● Microsoft Teams Device Management (Microsoft Teams Rooms only)
● Zoom Rooms Administrator Portal (Zoom Rooms only)
● Software package you obtain from the Poly Online Support Center and upload with a USB flash
drive
● Provisioning service (for example, Poly Lens or Poly Clariti Manager)
Updating Paired Devices
When you update your system, you also update some of its paired devices (if those devices have a
new version available). Depending on your setup, these devices might include:
NOTE: Poly recommends updating all connected peripherals to the versions included in the
VideoOS software version installed on the video system.
106
Chapter 14System Maintenance
To Next Page
Loading...
Need help?
General
