Registering the System with Poly Lens
Poly Lens provides cloud-based management and insights for your system.
You can register your system with Poly Lens during system setup or on the Poly Lens registration
page. For more information, see Poly Lens Help.
Register the System with Poly Lens During System Setup
Register your system with Poly Lens during system during system setup.
1. When prompted to register with Poly Lens, do one of the following:
● Scan the registration QR code with your mobile device.
● Enter the registration URL in a browser.
● Select the registration link in the system web interface.
2. Follow the instructions to finish registering your system.
Your system remains registered with Poly Lens even after a reset or factory restore.
Register the System with Poly Lens Post Setup
If you don’t register during setup, you can do so on the Poly Lens registration page.
1. For instructions to register your system, go to Poly Lens Online Help Onboarding.
2. Review the instructions and go to Poly Lens to register your system.
Change the Conferencing Partner Application
When you change the conferencing provider, the system retains previously configured settings. It
also updates the provider setting for the Zero Touch Onboarding (ZTO) profile associated with your
system.
1. In the system web interface, go to General Settings > Provider.
2. Select the provider you want to change to.
3. Select Save, then select Restart.
The system restarts and launches the selected conferencing provider application.
Managing Peripheral Devices
You can pair, monitor, and unpair the devices connected to your system in the system web interface.
Pairing IP Devices on the Link-Local Network (LLN)
IP devices automatically pair with your system when connected to either of the system’s three
link-local network (LLN) ports.
The Studio X70, Studio X50, Studio X52, and Studio X30 systems don't support LLN connections.
You can pair the following devices to your G7500 system with an LLN connection:
24
Chapter 3Setting Up the System
To Next Page
Loading...
Need help?
General
