Poly Studio X30 Administrator's Guide

Setting Description
DNS Server Specifies the DNS server address for the Wi-Fi network.
This setting is read-only if your system gets its IP address
automatically.
DNS Alternate Server
Specifies the alternate DNS server address for the Wi-Fi
network.
This setting is read-only if your system gets its IP address
automatically.
5. Select Connect.
If you’re using Microsoft Team Rooms as a provider, reboot the system.
Configure Wi-Fi Settings from System Device Settings
Set up the Wi-Fi network from Device Settings on your video system or device.
1. Select More > Device Settings.
2. Select Admin Settings, then enter the admin credentials for the system.
3. Select the check box for Enable Wi-Fi, then select Setup a Wi-Fi Network.
4. Follow the onscreen wizard to continue setting up your Wi-Fi network.
54
Chapter 6Configuring Network Settings

Poly Studio X30 Specifications

General

Camera Field of View	120°
Product Type	Video Conferencing System
Speakers	Integrated stereo speakers
Bluetooth	Bluetooth 5.0
Zoom	5x digital zoom
Network Protocol	IPv4, IPv6
Display Output	HDMI
Video Resolution	4K Ultra HD (3840 x 2160)
Audio Features	NoiseBlockAI, Acoustic Fence
Connectivity	Wi-Fi, Bluetooth
Ports	1x Ethernet
Operating System	Android
Video Standards	H.264, H.265
Wireless Protocol	802.11ac Wi-Fi
Security Protocols	802.1X
Content Sharing	Wireless content sharing
Compatibility	Microsoft Teams, Zoom