Polycom Trio 8800

13
Using a Screen with the Polycom Trio 8800
When using the Polycom Trio 8800 to display video or content as part of a Skype call or for
presentation purposes the meeting room display must be switched on the and the correct video
input selected.
Step 1: To power on the display press the
“On” button on the Extron unit. Note: Not all
meeting rooms may have an Extron unit.
Step 2: On the display powers on press the
“AUX VIDEO” button located on the Extron
unit.
Step 3: If using the video camera attached to
the Polycom Trio 8800 confirm that the
privacy cover is open.
Step 4: The Polycom Trio 8800 screen should
now be visible on the meeting room display.
Note: The video camera is disabled by default.
To enable video before a call press the Quick
Access Menu button on the phone screen and
press “Start My Video”.