23
POSEIDON M28 USER MANUAL
The rmware in the connected unit is not matching the version used in the M28
unit. Update the rmware from the M28 by selecting the menu “Firmware update”
located in the end of the dive menu list.
FW missmatch
SE7EN
Ceiling information with depth of the current decompression stop.
Pre-breathe with countdown in seconds. For more information about
pre-breathe, see the Rebreather manual.
Information that a rmware update is in progress on the bus, but is not issued
from the M28 unit.
FW update
HUD
From the menu list, select the “Firmware update” to perform a rmware update
of the connected devices.
To Next Page
Loading...
