Need help?Do you have a question about the POSEIDON M28 and is the answer not in the manual?
Guides the user through the initial power-on and setup process of the M28.
Describes how to read and interpret information displayed on the M28 screen.
Explains the display and content of the Dive app mode on the M28.
Details the menu structure for configuring and using the Open Circuit dive mode.
Outlines the menu for Setpoint and CPOD modes, including gas configurations.
Covers the menu structure for the SE7EN CC mode when connected to the M28.
Details critical alerts requiring immediate dive termination or specific ascent procedures.
Describes general alerts that indicate parameters are out of acceptable range.
Explains the stop alert for rapid ascent and the required diver response.
Indicates potential issues with the M28's electronics or connections.
Alerts the diver to incurred decompression obligations and displays the current stop.
Lists specific dive-related alarms and their activation/deactivation conditions.
Alerts for loss or restoration of connection with connected devices like SE7EN or CPOD.
Guides on updating the M28 firmware via Wi-Fi connection.
Guides the user through the initial power-on and setup process of the M28.
Describes how to read and interpret information displayed on the M28 screen.
Explains the display and content of the Dive app mode on the M28.
Details the menu structure for configuring and using the Open Circuit dive mode.
Outlines the menu for Setpoint and CPOD modes, including gas configurations.
Covers the menu structure for the SE7EN CC mode when connected to the M28.
Details critical alerts requiring immediate dive termination or specific ascent procedures.
Describes general alerts that indicate parameters are out of acceptable range.
Explains the stop alert for rapid ascent and the required diver response.
Indicates potential issues with the M28's electronics or connections.
Alerts the diver to incurred decompression obligations and displays the current stop.
Lists specific dive-related alarms and their activation/deactivation conditions.
Alerts for loss or restoration of connection with connected devices like SE7EN or CPOD.
Guides on updating the M28 firmware via Wi-Fi connection.
General| Display | LCD |
|---|---|
| Ascent Rate Indicator | Yes |
| Altitude Adjustment | Yes |
| Audible Alarm | Yes |
| Battery Type | CR2450 |
| Maximum Depth | 120 meters |
| Water Resistance | Up to 120 meters |
| Type | Dive Computer |
| Modes | Air, Nitrox, Gauge |
| Nitrox | Yes |
| PC Interface | Yes, USB |
To Next Page
