61
POSEIDON M28 USER MANUAL
disconnection message and the alarm icons requesting actions are deactivated.
A ashing Electronics alert icon will however remain active to remind you that a
disconnection problem still exists.
Disconnection alarms can be reset when not diving. Resetting a disconnection
alarm will deactivate the message together with all related alarm signals.
Reconnection alarms can be acknowledged at any time. Acknowledging a
reconnection alarm means that the associated message and alarm signals are
deactivated.
Notice that it is your responsibility to take appropriate action before
acknowledging or resetting any disconnection or reconnection alarm.
Alarm Activation condition Deactivation condition
SE7EN disconnected Data from SE7EN not received
as expected.
Data received from SE7EN
OR alarm reset by user
HUD disconnected Data from HUD not received as
expected.
Data received from HUD
OR alarm reset by user
CPOD disconnected Data from CPOD not received
as expected.
Data received from CPOD
OR alarm reset by user
Display disconnected Data from Display not received
as expected.
Data received from Display
OR alarm reset by user
SE7EN reconnected Data received from previously
disconnected SE7EN.
Alarm acknowledged by
the user OR SEVEN
disconnected
HUD reconnected Data received from previously
disconnected HUD.
Alarm acknowledged by the
user OR HUD disconnected
CPOD reconnected Data received from previously
disconnected CPOD.
Alarm acknowledged by
the user OR CPOD
disconnected
Display reconnected Data received from previously
disconnected Display.
Alarm acknowledged by
the user OR Display
disconnected
To Next Page
Loading...
