power automation PA 8000 EL User Manual

ACE Automation
A-721, Twinrex B/D
Deokpungdong-ro 111-10, Hanam-si
Gyeonggi-do, 465-831
South Korea
9.2 Spare parts
Due to the high quality of our products we can assure you that you
will not need this service often. Spare parts are often urgent so
Power Automation provides the relevant spare parts at the local
service centers for immediate dispatch.
Our 3 service centers in Europe, North America and Asia allow us
to deliver all needed parts typically within 24 hours.
Only trust PA's original parts - because every part passes our tight
quality checks.
We also offer consulting services to identify the most critical parts
for the machines in your production facilities. We suggest what crit-
ical stock may be required to ensure a minimum downtime of your
machines. Our specialists look for common parts to keep your
inventory levels at a minimum.
9.3 Return policy and procedure
Power Automation will only accept control units and
components for replacement or repair, if they have
been returned in adherence to the provisions given
below.
n If material warranty is void or if no error is detected, a testing
flat rate will be charged. If an error is determined, the testing
flat rate will be charged to the repair costs.
n If material warranty is void you will receive a repair offer.
n Before the repair starts we need a repair order from you, if the
material warranty is extinguished.
Spare Parts
Policy
PA 8000 EL CNC control unit
Service and return process
24.09.2015 | 97

power automation PA 8000 EL Specifications

General

Brand	power automation
Model	PA 8000 EL
Category	Control Unit
Language	English