UPS Startup
74
Powerware
®
9170
+
UPS User’s Guide S Rev B www.powerware.com
7. To password-protect the UPS On/Off function, press the
or
button to make your selection; then press the button. If a
password is required, the UPS On and Off functions are
accessible only after first entering the correct password value
(0377).
ON OFF Password?
No
ESC
8. The UPS is now ready to operate, and displays the normal
On/Off function screen.
Press the ON button on this screen to start the UPS.
These configuration parameters are accessible during normal UPS
operation by pressing the Config button through the front panel display.
To Next Page
Loading...
