Chapter 5 Function parameter
29
5-1-1.d0Group - Monitoring function group
Frequency converter theory
Detected value for DC bus voltage
Effective value for Actual motor current
Calculated value for motor output power
Motor output torque percentage
Actual pulse count value in counting function
Actual length in fixed length function
Motor actual running speed
Reference value percentage when PID runs
Feedback value percentage when PID runs
Stage display when PLC runs
High-speed pulse input
frequency
High-speed pulse input frequency display,
unit: 0.01Khz
Feedback
speed(unit:0.1Hz)
Actual output frequency of converter
Remaining run time display, it is for timing
run control
Show the line speed of DI5 high speed pulse
sampling, according to the actual sample
pulse number per minute and E0.07, calculate
the line speed value.
Total time of current inverter power-on
Total time of current inverter run
HDI(DI5) impulse
frequency
HDI(DI5) High-speed impulse input
frequency display, unit: 1Hz
Frequency, torque or other command values
set by communication port
PG feedback speed, to an accuracy of 0.01Hz
Frequency set by F0.03 master frequency
setting source
To Next Page
Loading...
Need help?
General
