PPT Vision A-Series - System Specifications and Connections

PPT VISION, Inc. When Your System Arrives
A-Series Hardware Guide
2-3
System Specifications
This section lists the general operating specifications for the PPT A-Series camera. More detailed specifications are listed
in other appropriate sections of this manual.
Operating Environment
Characteristics
The A-Series camera’s optical and speed characteristics and the imager’s relative response are here.
The camera’s relative sensitivity to light is approximately 78% of the sensitivity of the T-Series camera and the C-Series
5200 camera.
Dimensions 2.678 w x 5.5 h x .945 d (inches)
68 w x 139.7 h x 24 d (mm)
Weight .96 lb. (.44 kg.)
Input Power
+24 VDC +/- 10%
.50 A (min.)
Temperature
Humidity
0° to +50° C ((+32 to +122 F)
20% to 80% (non-condensing)
Pick-up Device CMOS active pixel sensor with 752 (H) x 480 (V)
pixel image
Imager Type 1/3 (5.35mm diag) - 4.51mm(H) x
2.88mm(V)
Capture Rate 60 full-resolution fps; higher with partial scan
Pixel Size 6.0 x 6.0 micrometers
Gain 100% to 395%
Shutter Open 30 to 193,629 microseconds
Lens Mount C Mount
Relative Response
Wavelength (nm)