PR4000 9mt 4x1000W METAL HALIDE
TL073-11-02-03
01-02-2011
Lower rear stabilizers through the handle (Fig. 5).
Make reference to the spirit level for the correct stability of the structure (Fig. 6).
Warning!!! It is not possible to raise the tower if all stabilizers are not correctly extracted.
(Fig. 5) (Fig. 6)
Before use the machine it’s recommended the correct acquaintance on operation for all the
commands of the lighting tower.
Start the engine like described at the chapter “13.5 ENGINE STARTING”.
Warning!!! Before raising up the telescopic mast check that transport hooks are unlocked.
(Fig. 7)
(Fig. 7)
To Next Page
Loading...
