Precision Digital Corporation Loop Leader PD6600 Series User Manual

Loop Leader PD6600 Series Loop-Powered Meters Instruction Manual
39
Runtime & Cycle Count (INFO)
The relay information menu shows runtime and cycle
count for each relay. These values may be cleared at
any time by selecting the Clear option (CLEAR?). If
the cycle count or runtime values need to be changed
on a frequent basis, it would be convenient to set up a
front panel button or the digital input to simplify this
process.
Note: See the menu tree under Solid State Relay
Outputs (RELAY) on page 26 for complete menu
structure on this feature.
Meter displaying the
amount of time a relay
has been activated
Meter displaying the
number of times a relay
has cycled
Changing Engineering Units
During operation of the meter, it is possible to change
the display units within the selected unit class without
the need to re-scale the meter. The UNITS menu in the
DISPLAY menu
allows the unit of measure to be changed (e.g. from
gallons/second (GAL/s) to liters/second (L/s)) and the
meter will automatically convert the display values to
the new unit of measure. If entering a custom unit
(CUSTOM), a custom conversion factor will need to be
entered. See Changing the Units (UNITS) on page 21.

Precision Digital Corporation Loop Leader PD6600 Series Specifications

General

Brand	Precision Digital Corporation
Model	Loop Leader PD6600 Series
Category	Measuring Instruments
Language	English