Precision Digital Corporation Loop Leader PD6600 Series - Meterview XL Programming Software; General Compliance Information; Electromagnetic Compatibility

Loop Leader PD6600 Series Loop-Powered Meters Instruction Manual
8
MeterView XL Programming
Software
Availability
Free download from www.predig.com
System
Requirements
Microsoft® Windows® 7 & 10
Communications
USB 2.0
(Standard USB A to Micro USB B)
Configuration
Configure all parameters on the meter.
Configure meters one at a time.
Configuration
Files
Generate with or without meter
connected; Save to file for later use.
USB Power
Connection
Meter is powered by USB connection
during programming, if 4-20 mA loop is
not connected.
General Compliance
Information
Electromagnetic Compatibility
EMC Emissions
•
CFR 47 FCC Part 15 Subpart B Class A
emissions requirements (USA)
• AS/NZS CISPR 11:2004 Class A ISM
emissions requirements (Australia)
• EN 55011:2009/A1:2010
Group 1 Class A ISM emissions
requirements (EU)
• ICES-001 Issue 4 ISM emissions
requirements (Canada)
EMC Emissions
and Immunity
EN 61326-1:2013 EMC requirements for
Electrical equipment for measurement,
control, and laboratory use – Inductrial Use