EU Declaration of Conformity
Issued in accordance with ISO/IEC 17050-1:2004 and ATEX Directive 2014/34/EU.
We,
Precision Digital Corporation
233 South Street
Hopkinton, MA 01748 USA
as the manufacturer, declare under our sole responsibility that the product(s),
Model PD6606 and PD6608 Loop-Powered Process Meters
to which this declaration relates, is in conformity with the European Union Directives shown below:
2014/35/EU Low Voltage
Directive
2014/34/EU ATEX Directive
2014/30/EU EMC Directive
2011/65/EU RoHS Directive
This conformity is based on compliance with the application of harmonized or applicable technical
standards and, when applicable or required, a European Union notified body certification.
Standards:
EN 55011:2016
EN 60079-0:2012+A11:2013
EN 60079-11:2012
EN 61010-1:2010
EN 61326-1:2013
The standards EN 55011:2016, EN 60079-0:2012+A11:2013, and EN 61010-1:2010 are no longer
harmonized. The requirements of these standards have been checked against the harmonized standard
EN 55011:2016+A1:2017, EN 60079-0:2018, and EN 61010-1:2010+A1:2019 and there were no major
technical changes affecting the latest technical knowledge for the products listed above.
EC Type Examination Certificate: CML 17ATEX2015X
Product Markings: II 1 G
Ex ia IIC T4 Ga
Tamb = -40°C to +70°C
ATEX Notified Body for EC Type Examination Certificate: CML B.V., NB 2776
Hoogoorddreef 15
1101BA, Amsterdam, Netherlands
ATEX Quality Assurance Notification No.: SIRA 10 ATEX M462
ATEX Notified Body for Quality Assurance: CSA Group Netherlands B.V., NB 2813
Utrechtseweg 310
6812 AR, Arnhem, Netherlands
Signed for and on behalf of Precision Digital Corporation:
Name: Jeffrey Peters
Company: Precision Digital Corporation
Title: President
Date: 10/15/2019 Document No: DoC PD6606 {101519}
To Next Page
Loading...
Need help?
General
