Precor Experience 700 line Series User Manual

4. Pull the cover away from the frame to release the cover tabs and remove.
5.
Repeat the same removal procedure to remove both the left or right trim end
cap covers.
Installation Instructions
Repeat procedure for both the left and right covers.
1. Reinstall the end cap cover onto the end of the frame rail and press to lock cover tabs in
place. Secure using the three #3 Phillips screw fasteners. One fastener on the top, one
fastener on the end, and one fastener on the bottom.
2. Repeat procedure for both the left and right end cap covers.
3. Reinstall the left and right trim landing covers, see "Covers and Panels Replacement"
on page70.
4. Reinstall the hood cover, see "Hood Cover Replacement" on page72.
5.
Repeat the same installation procedure to install both the left and right trim end
cap covers.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 79
6 Replacement Procedures
Covers and Panels Replacement

Precor Experience 700 line Series Specifications

General

Brand	Precor
Model	Experience 700 line Series
Category	Treadmill
Language	English