GETTING STARTED 2Owner’s Manual
31
Overview Getting
Started
Controls and
Connections
Cascading
Units
Technical
Information
Sample Hookup Diagrams 2.3/
information on the Universal Control and the
Device Window, please see Section 3.1. Because
of FireWire streaming limitations, cue-mix zero-
latency monitoring is not available when daisy-
chaining multiple FireStudio-family interfaces.
The Main Output as a Cue Mix
It is possible to designate the main output in Audio
I/O Setup as a cue mix. This is helpful if you often
record yourself and require quick access to zero-
latency monitoring for live inputs. When the main
output is designated as a cue mix, a Zero Latency
button will appear on any audio channel with an
assigned audio input in the Console, below the
Mute, Solo, Record, and Monitor buttons.
With the Zero Latency button and Monitor Enable
both engaged, you will hear the live zero-latency
input straight from your FireStudio Mobile (as
opposed to through software). As such, you will
no longer hear the effects of any inserts on the
channel. However, you will still hear the result of
any sends on the channel, as Bus and FX Channels
will still output normally.
To Next Page
Loading...
