Table of Contents
1.0 Overview — 1
1.1 Introduction — 1
1.2 About This Manual — 2
1.3 Meet the StudioLive RM32AI and RM16AI — 2
1.4 What’s In the Box — 3
2.0 Hookup — 4
2.1 Front-Panel Connections and Controls — 4
2.2 Rear-Panel Connections and Controls — 8
2.3 Typical Band Hookup — 10
2.4 Typical Church Hookup — 12
3.0 Installing the UC Surface
Touch-Control Software — 14
3.1 Minimum System Requirements — 14
3.2 Downloading UC Surface for iPad
and QMix-AI — 14
3.3 Wired Ethernet Control Setup — 15
3.4 Wireless Control Setup — 15
3.5 Computer Recording Setup — 16
3.6 Computer Hookups — 18
3.6.1 Command and Recording –
FireWire-equipped computer – Wireless
via Ethernet — 18
3.6.2 Command and Recording –
FireWire-equipped computer – Wireless
with dongle — 18
3.6.3 Command and Recording – FireWire-
equipped computer – Wired — 19
3.6.4 Separate Command and Recording –
Wireless via Ethernet — 19
3.6.5 Separate Command and Recording –
Wireless with Dongle — 20
3.6.6 Separate Command and Recording –
Wired — 20
3.6.7 Separate Touch Screen Command and
Recording – Wireless via Ethernet — 21
3.6.8 Separate Touch Screen Command and
Recording – Wireless via Dongle — 21
3.6.9 Separate Touch Screen Command and
Recording – Wired — 22
3.6.10 UC Surface iPad and QMix-AI
iPhone Connections for Any of
These Hookups — 22
4.0 Getting Started — 23
4.1 Level-Setting Procedure — 23
5.0 A Tour of UC Surface Features — 24
5.1 UC Surface Settings — 24
5.2 Mix Scroll View — 26
5.3 Meter Bridge — 28
5.4 Flex Fader and Mix Selection Area — 28
5.5 Filter DCAs — 30
5.6 Main Mix Area — 33
5.7 Fat Channel — 35
5.7.1 Channel Settings — 37
5.7.2 Channel Input — 38
5.7.3 Fat Channel Processing — 39
5.7.4 Compressor — 40
5.7.5 Limiter — 41
5.7.6 Parametric EQ — 41
5.7.7 Preset List/Editor Button — 42
5.7.8 Graphic EQ — 43
5.7.9 Effects — 45
5.8 Working With Presets — 47
5.9 Mix Scene Quick Recall — 48
5.10 Mute Groups — 49
To Next Page
Loading...
