PRESONUS StudioLive RM32AI - RM16 AI and RM32 AI Technical Specifications

7.0 Technical Specifications
7.2 RM16 AI and RM32 AI Technical Specifications
StudioLive™ RM-Series Mixers
Owner’s Manual
60
7.2 RM16 AI and RM32 AI Technical Specifications
RM16AI RM32AI
Microphone Preamp
Input Type
XLR Female, balanced, locking XLR Female, balanced, locking
Frequency Response to Direct Output (at unity gain)
20-40 kHz, ±0.5 dBu 20-40 kHz, ±0.5 dBu
Frequency Response to Main Output (at unity gain)
20-20 kHz, ±0.5 dBu 20-20 kHz, ±0.5 dBu
Input Impedance
1 kΩ 1 kΩ
THD to Main Output (1 kHz at unity gain)
0.005%, +4 dBu,
20-20 kHz, unity gain, unwtd
0.005%, +4 dBu,
20-20 kHz, unity gain, unwtd
S/N Ratio to Main Output (Ref = +4 dB, 20 kHz BW, unity
gain, A-wtd)
94 dB 94 dB
Common Mode Rejection Ratio (1 kHz at unity gain)
65 dB 65 dB
Gain Control Range (±1 dB)
0 dB to +65 dB 0 dB to +65 dB
Maximum Input Level (unity gain)
+22 dBu +22 dBu
Phantom Power (±2 VDC)
48 VDC, switchable per channel 48 VDC, switchable per channel
Tape Inputs
Type
RCA Female, unbalanced (stereo pair) RCA Female, unbalanced (stereo pair)
Maximum Input Level
+12 dBu +12 dBu
Main Outputs
Type
XLR Male, balanced XLR Male, balanced
Rated Output Level
+24 dBu +24 dBu
Output Impedance
100Ω 100Ω
Mix Outputs
Type
XLR Male, balanced XLR Male, balanced
Rated Output Level
+24 dBu +24 dBu
Output Impedance
100Ω 100Ω
Headphone Output
Type
¼” TRS Female, active stereo ¼” TRS Female, active stereo
Maximum Output
120 mW/ch. @ 60Ω load 120 mW/ch. @ 60Ω load
Frequency Response
20 Hz – 20 kHz (± 0.5 dB) 20 Hz – 20 kHz (± 0.5 dB)
THD+N
0.01%, 1 kHz, max gain,
20 Hz BW, unwtd
0.01%, 1 kHz, max gain,
20 Hz BW, unwtd
S/N Ratio
96 dB, 1 kHz, max gain,
20 Hz BW, unwtd
96 dB, 1 kHz, max gain,
20 Hz BW, unwtd
System Crosstalk
Input to Output
-90 dB (Ref = +4 dBu
20 Hz-20 kHz, unwtd)
-90 dB (Ref = +4 dBu
20 Hz-20 kHz, unwtd)
Adjacent Channels
-87 dB (Ref = +4 dBu
20 Hz-20 kHz, unwtd)
-87 dB (Ref = +4 dBu
20 Hz-20 kHz, unwtd)
Noise Gate / Expander
Threshold Range
-84 dB to 0 dB -84 dB to 0 dB
Attack Time
0.02s to 500 ms / 0.5 ms 0.02s to 500 ms / 0.5 ms
Release Time
0.05s to 2s 0.05s to 2s
Expander Attenuation Range
2:1 (fixed) 2:1 (fixed)
Noise Gate Attenuation Range
-84 to 0 dB -84 to 0 dB
Key Filter
2nd-order, resonant bypass; Q=0.7 2nd-order, resonant bypass; Q=0.7
Key Listen
Off, 40 Hz to 16 kHz Off, 40 Hz to 16 kHz