4 A26361-K878-Z102-2-7619
Features Introduction
USB port
The additional USB interface on the front of the server supports activities
carried out by the service technician. The maximum length of the external cable
are three meters.
High level of availability and reliability
When memory data is accessed, 1-bit errors in the main memory are recog-
nized and automatically corrected with the ECC (Error Correcting Code)
method. The patented memory scrubbing function regularly starts up the EDC
mechanism and thus ensures continuous data integrity.
The memory modules used support Chipkill™ technology, which in addition
increases the effectiveness of the monitoring and correction of memory errors.
ASR&R (Automatic Server Reconfiguration and Restart) restarts the system in
the case of an error and automatically „hides“ the defective system components.
The PDA (Prefailure Detection and Analyzing) technology from Fujitsu Siemens
Computers analyzes and monitors all components important for system
reliability.
The onboard SCSI RAID controller support RAID Levels 0, 1, 5 10 and 50 and
increase system availability. The hot-swap HDD modules provide additional
security.
server management
Server management is implemented with the aid of the supplied ServerView
software and PDA (Prefailure Detection and Analyzing) technology from Fujitsu
Siemens. PDA reports the threat of a system error or overloading early on so
that preventative measures can be taken.
ServerView enables the management of all PRIMERGY servers in the network
via a central console. The following key features are supported among others
by ServerView in this context.
● Remote power-on (Wake On LAN)
● Temperature monitoring of the CPU and the surrounding area
● Monitoring of the utilization of the PCI buses
● Detailed status and error reports for bus systems, processors and main
memory
To Next Page
Loading...
