A26361-K878-Z102-2-7619 5
Introduction Features
● Watchdog timer for Automatic Server Reconfiguration and Restart (ASR&R)
in the event of failure of memory modules or processors
● Power monitoring
● Early detection of a defective fan
● Watchdog timer for operating system monitoring and application monitoring
with ASR&R
Further information on ServerView server management is provided in the
associated documentation (see “Related Publications” on page 69).
ServerStart
You can configure the PRIMERGY server quickly and purposefully with the
ServerStart software provided. User-guided menus are available for installing the
server operating system (for further details see „ServerStart Bundle“).
Service and support
PRIMERGY server are service-friendly and modular, thus enabling quick and
simple maintenance.
The handles and locks (touch point) of the different hot-plug/hot-swap compo-
nents are colored green to ensure simple and immediate recognition.
In order to avoid damage to components by incorrect handling when they are
being installed and removed, green highlighting also identifies the component
areas that can be touched without causing damage to the respective
component.
The flash EPROM program supplied with the Fujitsu Siemens Computers
utilities supports a fast BIOS update. The RemoteView Remote Test and
Diagnosis System allows the PRIMERGY RX200 Server to be maintained from
remote locations. Remote diagnosis can be performed as a result for system
analysis, remote configuration and remote restart should the operating system
or hardware fail.
To Next Page
Loading...
