A26361-K878-Z102-2-7619 43
Preparation for Use and Operation Operating and Indicator Elements
Operation elements
Indicators on the control panel
ON/OFF button
When the system is switched OFF, it can be switched ON again by
pressing the ON/OFF button. When the system is operating, pressing
the ON/OFF button will switch OFF the system.
I The ON/OFF button does not disconnect the server from the
mains. To disconnect from the mains completely, remove the
power plug.
NMI NMI button
V CAUTION!
Please do not press! Risk of losing data!
The NMI button may only be used by Service.
RST Reset button
Pressing the reset button reboots the system.
V CAUTION!
Risk of losing data!
ID ID button
Lights up (blue) on the front and on the rear of the server when the
ID button is pressed. The two ID indicators are synchronized.
Power-on indicator (dual color)
Lights orange when the server is switched OFF, but mains voltage is
present (standby mode).
Lights green when the server is switched ON.
Drive access indicator
An internal SCSI drive (HDD or backup drive) is being accessed.
To Next Page
Loading...
