44 A26361-K878-Z102-2-7619
Operating and Indicator Elements Preparation for Use and Operation
Indicators on the drives
CD-ROM indicator
Lights green when the storage medium is being accessed.
Floppy disk drive indicator
Lights green when the storage medium is being accessed.
Global Error indicator (orange)
Does not light when the system is ok. No service incident or
critical event has occurred.
Flashes orange when a critical event has occurred. Users can
check BIOS Setup, system- and eventlog or via ServerView for
event details. The indicator also flashes in standby mode.
Lights orange when a prefailure event has been recognized.
Users can check system- and eventlog or via ServerView for event
details. The indicator also lights in standby mode.
If the event is still acute after a power failure, the indicator is
activated after the restart.
ID ID indicator (blue)
Lights blue when the system has been selected by pressing the
ID button. To deactivate, press the button again.
The ID indicator can also be activated via ServerView and its status
reported to ServerView.
!
To Next Page
Loading...
