-101-
Picture of Color Mixing: Example 3
Cause
Color mixing results when ink migrates across the printhead surface from heavily
printing nozzles into the nearest odd or even nozzle row that is not printing.
Solution
1. Use profile tool loading (Printing Preferences→Color Tab→Color Matching) to verify
that the correct color profiles are being used. This is a possible operator handling issue.
Use the correct profile and re-evaluate the performance.
If not resolved, continue to the next step.
2. Run the servicing process (TCL › maint_clear_color_mix <level>) and re-evaluate the
plots.
If not resolved, contact Customer Service and report error code CM04-03 Servicing
process unresolved.
To Next Page
Loading...
Need help?
General