Printing Innovation iCUBE 1 User Manual

-71-
8. In Toolbox press’Home Service Station’ button to re-install the MM into the print
engine.
Ink Tank Latches Inspection
1. Release the three ink tank latches.
Picture of released ink tank latches
Carefully slide all five ink tanks, one at a time, out of the unit.
Picture of removed Ink Tanks
2. Verify that Toolbox reflects the tank removal.
3. Align each ink tank with the rails on the printer and insert. Repeat until all five ink
tanks are re-installed.
Picture of re-installing Ink Tanks

Printing Innovation iCUBE 1 Specifications

General

Brand	Printing Innovation
Model	iCUBE 1
Category	Label Maker
Language	English