PRO AIR TPK 21 - Page 3

Table of contents
8.2.
Display
16
8.2.1.
Description of display
17
8.2.1.1.
Description of main screen
17
8.2.1.2.
Description info screen
18
8.2.2.
Adjustment of display fields
19
8.2.2.1.
Possible display variation concerning the different fields
20
8.3.
Personalising Password
22
8.4.
Adjustment of national languages
27
8.5.
Information
30
8.6.
Switching the heating(Heater) system On and Off
33
8.7.
Factory settings
36
8.8.
Outputs
39
8.9.
Touchscreen calibration
44
8.10.
Measurement value simulation
47
8.11.
Statistics Reset
52
8.12.
Reset Fault Memory
55
8.13.
Filter
58
8.14.
Units setting
61
8.15.
Setting the Date / Time
64
8.15.1.
Setting the Date
64
8.15.2.
Setting the Time
68
9.
Configuration of Relay Adjustments
72
9.1.
Setting Source (Output Parameters)
74
9.2.
Setting the Relay Switching Characteristics
75
9.3.
Setting the Limit Values
76
10.
Configuration of Analog Output
78
10.1.
Selection of desired Source (Output Parameter)
80
10.2.
Selection of the desired analog output value
81
10.3.
Configuration of lower analog output value
82
10.4.
Configuration of upper analog output value
83