PRO AIR TPK 21 - Page 56

51
13. Select the desired output (the field will be highlighted), and the display will automatically
jump to the next level.
14. If the „Set Value“ field is not already highlighted, select the field and
confirm with .
You can now enter a measured value for which the simulation should be performed.
NOTE: For each relevant menu item you can press to call up the help text in
your selected language.
!
The „Back“ key takes you back to the previous level until you are back at the home screen.
„Undo“,
e.g. for incorrect
entriest
„Enter“,
e.g. to confirm an input
X
0,00
1
2
3
4
5
6
-
7
8
9
0
.
X
UMC Channel
Set Value