ProCurve Wireless Access Point 10ag - 4 Setting up the Access Point; Configuring Basic Settings

To Next Page

To Previous Page

4-1

Setting Up the Access Point

This chapter provides information on how configure the access point’s

network, wireless, and security settings to ensure its proper operation on the

network. It also describes how to configure advanced options, such as the

wireless radio settings and the built-in SNMP agent.

Topics discussed in this chapter include:

■ Configuring Basic Settings

■ Configuring Wireless Settings

■ Configuring Security Settings

■ Controlling Access to the Wireless Network

■ Configuring Advanced Settings

Configuring Basic Settings

Basic settings refer to the IP address settings and the country/region code

assigned to the access point.

Note If the access point's IP address settings are already compatible with your

network, you do not need to change them.