ProCurve Wireless Access Point 10ag - Environmental; Connectors; EMC Compliance (Class B; Radio Signal Certification

A-2
Specifications
Environmental
Connectors
■ The 10/100 Mbps RJ-45 twisted-pair port is compatible with the
IEEE 802.3u 100Base-TX and IEEE 802.3 Type 10Base-T standards.
Note: To provide Power over Ethernet to the access point, all 4 pairs of
wires must be connected for any network cable attached to this port.
Safety
Complies with:
■ IEC 60950-1: 2001
■ EN 60950-1: 2002
■ UL 60950-1 1st Ed.
■ CAN/CSA-C22.2 No. 60950-1-03
EMC Compliance (Class B)
Complies with:
■ FCC Part 15.107 and 15.109
■ ICES-003 (Canada)
■ VCCI
Radio Signal Certification
Complies with:
■ FCC Part 15, Subpart C and E
■ RSS-210 (Canada), Issue 7 (June 2007)
■ EN300.328 v1.7.1 (2006-10)
■ EN 301.893 V1.2.3 (2003-08)
Operating Non-Operating
Temperature: 0°C to 40°C (32°F to 104°F) PoE mode -40°C to 70°C (-40°F to 158°F)
Relative humidity:
(non-condensing)
15% to 95% 10% to 90%
Maximum altitude: 3.05 Km (10,000 ft)