3-5
Getting Started With Access Point Configuration
Tasks for Your First Web Browser Interface Session
■ The information pane: Shows related configuration options for each
item on the menu. For example, if you click IP Settings on the menu, the
information pane loads the parameters that you can set or edit, and then
save for your desired configuration change to take effect.
Tasks for Your First Web Browser
Interface Session
The first time you access the Web browser interface, there are a number of
basic tasks that you should perform. Table 3-1
lists these essential tasks. For
specific instructions on the how perform the procedure, refer to the page
number listed in the right column.
In setting up your access point for network installation, this manual covers
many of the tasks that should be considered for proper security and manage-
ment. Each of these tasks are detailed in their respective sections, however,
this summary is provided as an aid for establishing your network.
Table 3-1. Basic Web Interface Tasks
To Learn How to Do This Task Refer to
Change the default password “Changing the Management Password” on page 5-3
Set the correct country/region code “Configuring Basic Settings” on page 4-1
Control access to the wireless network “Controlling Access to the Wireless Network” on
page 4-22
Set wireless security from No Security (default) to at least WPA/
WPA2
“Configuring Security Settings” on page 4-7
To Next Page
Loading...