A-1
A
Specifications
Physical
Electrical
Note: Power can also be provided to the access point through the Ethernet
port based on IEEE 802.3af Power over Ethernet (PoE) specifications. The
access point is a Class 3 device, that is, the maximum power required is in the
range of 6.49 to 12.95 watts. When both PoE is provided and the adapter is
plugged in, PoE is turned off.
Japanese Power Cord Statement
Width: 178 mm
Depth: 103 mm
Height: 34 mm
Weight: 285 g
Adapter
AC voltage: 100-240 volts, 0.5A, 50/60 Hz
DC voltage: 12 volts, 1.25A (max)
Power consumption: 15 watts (max)
To Next Page
Loading...