Prodigit 3270 Series - Table 4-4 STAGE COMMAND SUMMARY; Table 4-5 SYSTEM COMMAND SUMMARY

3270 Series Operation Manual 97
STAGE COMMAND
REMARK
LOAD {SP}{ON│OFF│1│0} {;│NL}
LOAD {?} {;│NL}
0:OFF 1:ON
MODE {SP} {CC│LIN│CR│CV│CP} {;NL}
MODE {?} {;│NL}
0|1|2|3|4:CC|LIN|CR|CV|CP
SHOR {SP} {ON│OFF│1│0} {;│NL}
SHOR {?} {;│NL}
0:OFF 1:ON
PRES {SP} {ON│OFF│1│0} {;│NL}
PRES {?} {;│NL}
0:OFF 1:ON
SENS {SP} {ON│OFF│AUTO│1│0} {;│NL}
SENS {?} {;│NL}
0:OFF/AUTO 1:ON
LEV {SP} { LOW│HIGH│0│1} {;│NL}
LEV {?} {;│NL}
0:LOW/A
1:HIGH/B
AFREQ {SP} {ON│OFF│1│0} {;│NL}
AUTO FREQUENCY
AFREQ {?} {;│NL}
0:OFF 1:ON
CLR{;│NL}
CLR:METER{;│NL}
ERR {?}{;│NL}
NG {?}{;│NL}
0:GO 1:NG
PROT {?}{;│NL}
NGENABLE{SP}{ON│OFF}{;│NL}
START{;│NL}
STOP{;│NL}
TESTING {?}{;│NL}
0:TEST END,1:TESTING
SYNC {SP}{ON│OFF│1│0} {;│NL}
SYNC {?} {;│NL}
0:OFF 1:ON
Table 4-4 STAGE COMMAND SUMMARY
System command：
COMMAND
NOTE
RETURN
RECALL {SP} {m }{;NL}
m=1~150 , m:STATE
STORE {SP} {m }{;NL}
m=1~150
m:STATE
REMOTE {;NL}
RS232/USB/LAN
command
LOCAL{; NL}
RS232/USB/LAN
command
NAME {?} {;

NL}
“XXXXX”
Table 4-5 SYSTEM COMMAND SUMMARY