98 PRODIGIT
Measure command
Table 4-6 MEASURE COMMAND SUMMARY
REMARK:
1. Current engineering unit: A/Arms
2. Resistance engineering unit: Ω
3. Voltage engineering unit: V/Vrms
4. Period engineering unit: mS
5. Frequency engineering unit: Hz.
6. Power engineering unit: W
7. Volt-Ampere engineering unit: VA
AUTO SEQUENCE:
AUTO SEQUENCE SET COMMAND NOTE RETURN
n=1~16 1~32
LOAD State n=1~150
1~150
Save “File n” data
RUN {SP} {F} {n} {;NL}
n=1~9
“PASS” or “FAIL:XX”
Table 4-7 Auto sequence command list
MEAS:TYPE{SP} {RMS|PEAK|MAX|MIN} {; NL}
To Next Page
Loading...
Need help?
General