Prodigit 3270 Series User Manual

3270 Series Operation Manual 125
5.7.2. Constant Power Discharge Test
1. Set mode is constant Power
2. Set the discharge power
3. Set the crest factor
This function is only used when testing
UPS discharge. When testing the battery
Discharge is no CF function.
6. Set the discharge time
7. Set the UVP Voltage
4. Set the Phase Lead or lag
This function is only used when testing
UPS discharge. When testing the battery
Discharge is no Phase Lead or lag function.
5. Set the Phase angle
This function is only used when testing
UPS discharge. When testing the battery
Discharge is no Phase angle function.

Prodigit 3270 Series Specifications

General

Brand	Prodigit
Model	3270 Series
Category	Measuring Instruments
Language	English