PROEL KDC1905 - List of Parameters

4.9.2 List of parameters
Note! Parameters above 900 are technical parameters and should not be changed without consultation with the
cassette manufacturer.
Technical parameters
Table 11: Table of technical parameters
1
Parameter not used from firmware 7r57. In its place appeared parameters from Table 15
Number Symbol Scope
mask
mask
mask
Parameter name
regulation time of the audio tracks (global only)
additional control panel flags (from 7r77)
device line flags
serial number of the satellite keyboard
keyboard sensitivity (lower value – higher sensitivity)
filling PWM of lock at idle
filling PWM of lock, phase 1
filling PWM of lock, phase 2
filling PWM of lock, phase 3
first phase time of locking control
third phase time of locking control
keyboard illumination brightness at idle
keyboard illumination brightness in active state
keyboard illumination time
PWM period of the lock
length of beeper from key
confirmation tone (in the device) of opening the lock with code
1
debugger flags
keyboard sensitivity
RFID security code
target number of the Open Programming
Open Programming time