4.12 User menu
From version 7r47 onwards, the user can change own lock code. Follow the procedure:
1. call the property
2. press KEY button (or press cyclically to maintain the timeout)
3. within 2 seconds, the resident must press P1 button on the device 5 times
4. a text appears and disconnection occurs – initial authorization has taken place
5. select the number of premises, 5 times KEY button, lock code – you will enter the user menu (displayed
)
6. Press one of keys:
(a) ‘0’ –> leaving the user menu while maintaining the initial authorization
(b) ‘3’ –> change of lock code
i. enter the current lock code and confirm with key
ii. enter the new lock code and confirm with key
iii. re-enter the new lock code and confirm with key
(c) ‘deletion’ –> leaving the menu with simultaneous blocking of the possibility of re-entering the menu,
without further initial authorization
(d) ‘key’ –> lock opening
To Next Page
Loading...