• 8 – display of the current downward gain setting
• 9 – louder track downwards
• – switching to Autosilencer adjustment
• 0 – switching on autosilencer automatics
It is important to start the adjustment by setting the track volume so that you can have a comfortable
conversation. If the system is induced, change the balance settings. Then gradually increase the gain of track
upwards and downwards and adjust the balance settings in real time so that the system does not induce. Repeat this
procedure until the balance is set so that the system does not induce, and then return to levels (tracks downwards and
upwards) to enable a comfortable conversation.
Autosilencer adjustment
In this mode the cassette, after changing the track parameter, the stopped Autosilencer is switched to this track:
if the microphone gain is changed at idle, tracks will be switched to idle mode of Autosilencer. If the loudspeaker
gain is changed, the system will be switched to track “downwards” (like when Autosilencer is induced). The display
currently indicates the track “on” according to previously described markings.
In this mode the following keys are used:
1 – reduction of microphone gain at idle state
2 – display of the current track setting upwards at idle
3 – increasing the microphone gain at idle state
7 – decrease speaker gain when Autosilencer is induced
8 – displaying the current loudspeaker volume in the active state of Autosilencer
9 – increasing the loudspeaker gain after activating Autosilencer
– switching to basic track adjustment
0 – switching on autosilencer automatics
The balance cannot be adjusted in Autosilencer adjustment mode.
To Next Page
Loading...