7. In case of installation with an additional keyboard (satellite), enter its serial number into the PBX. The
satellite keyboard will be inactive before entering the serial number. Enter the serial number in X001. When a
connection is established between KDC1905 and KDC1915, the satellite display will indicate the idle state by
displaying a dot.
8. For the satellite keyboard, repeat the audio track adjustment.
9. After the residents’ data and parameters have been entered, a cassette data backup is required. In order to do
so, enter program A-6, select subprogram 2. After displaying the message , enter the file name
(only digits, without extension) and accept it with key . The cassette will save the data in a form of CSV
file on the memory card.
10. Remove the memory card and save data dropped with A-6 program if necessary to restore the data.
To Next Page
Loading...