9.5.4
‘Display’
............................................................................. 60
9.5.5
‘HMI logout’
....................................................................... 60
9.5.6
‘Diaphragm part number: XXXXXXX’
................................ 60
9.5.7
‘Spare parts kit part number: XXXXXXX’
.......................... 61
9.6
‘Language’
........................................................................... 61
10 Start up.......................................................................................... 62
11
Operation....................................................................................... 66
11.1 Manual operation................................................................ 66
12 Maintenance.................................................................................. 68
13 Carrying out repairs....................................................................... 71
13.1 Cleaning valves................................................................... 71
13.2 Replacing the diaphragm.................................................... 73
14 Troubleshooting............................................................................. 77
14.1 Faults without a fault message............................................ 77
14.2 Fault messages................................................................... 78
14.3 Warning messages............................................................. 79
14.4 All other faults..................................................................... 80
14.5 Log book............................................................................. 80
14.5.1 Warning messages in the log book.................................. 80
14.5.2 Fault messages in the log book....................................... 81
14.5.3 Events in the log book...................................................... 82
15 Decommissioning.......................................................................... 83
16 Technical data............................................................................... 86
16.1 Performance data................................................................ 86
16.2 Viscosity.............................................................................. 87
16.3 Shipping weight................................................................... 87
16.4 Wetted materials................................................................. 87
16.5 Ambient conditions.............................................................. 88
16.5.1 Ambient temperatures...................................................... 88
16.5.2 Media temperatures......................................................... 88
16.5.3 Air humidity...................................................................... 88
16.5.4 Degree of Protection and Safety Requirements............... 89
16.6 Installation height................................................................ 89
16.7 Electrical connection........................................................... 89
16.8 Diaphragm rupture sensor.................................................. 90
16.9 Relay................................................................................... 90
16.10 Gear oil.............................................................................. 91
16.11 Sound pressure level........................................................ 91
17 Dimensional drawings................................................................... 92
18
Motor data sheets.......................................................................... 95
19 Liquid ends for Sigma/ 3................................................................ 96
20 Wear parts for S3Cb.................................................................... 106
20.1 Standard............................................................................ 106
20.2 Physiological safety........................................................... 106
21 Diagrams for adjusting the capacity............................................ 108
22
Declaration of Conformity for Machinery..................................... 109
23 Operating/Set-up overview of the Sigma X Control type............. 110
24 Operating menu of Sigma X Control type, complete................... 111
25 Continuous displays and secondary displays.............................. 115
26 Index............................................................................................ 117
Table of contents
4