Promise Technology Vess A6600 - P Ower O N E Nclosure

USB ports
OPAS LED
Power button
Vess A6600 front panel components, le side
power on enClosure
With the power supplies connected, the system can now be powered on.
If you are using JBOD storage expansion setup, power on the JBODs rst.
TopowerontheVessA6000subsystem,pressthePowerbuttononthefrontleftbracketfacing(seegure
below). Observe the LEDs on the front panel to make certain the boot up proceeds smoothly.
Important
26
IntroductionVess A6000 Series Storage Appliance for Video Surveillance