Promise Technology Vess A6600 User Manual

59
emAil settings
To change Email service settings:
1. Click the Administrative Tools icon.
2. Click the Software Management icon.
3. Click on Email in the Service List of the Service Management menu.
4. Make settings changes as required:
Under Service Setting -- Email choose a startup type:
• Automatic – (default) Starts and runs with the subsystem.
• Manual – You start the service when you need it.
Under Email Server Settings
• SMTP Server IP address
• SMTP Authentication under Email Server Settings
The Yes option enables authentication.
The No option disables.
• SMTP Authentication under Email Server Settings
Username – Required if SMTP authentication is enabled.
SMTP Authentication Password – Required if SMTP authentication is enabled.
Under Email Content Customization
• EmailSender(From)Address–Thesender’snameshownonnoticationmessages.
• EmailSubject–Thesubjectlineofthenoticationmessage.
5. Click the Submit button.
6. Click the Conrm button.
senDing A test emAil messAge
After email settings are completed, you can send a test email.
To send a test email message, complete email settings as described above and check the Send a test email
option box, then click the Submit button. Atestemailmessageissenttotheaddressyouspecied.
Promise Technology Product Manual

Promise Technology Vess A6600 Specifications

General

Brand	Promise Technology
Model	Vess A6600
Category	Security System
Language	English