Promise Technology Vess A6600 - Ow to Ebuild a Isk Rray

Logical Drive Informaon
Background Acvies - Start Rebuild 1
84
How to rebuild a diSk array
When a physical drive is indicated to be degraded or in critical state, the array that contains that drive needs to
be rebuilt. If you are not using Auto Rebuild (requires a Spare Drive), then you must rebuild the array manually
after the affected drive has been replaced. Follow the instructions here to rebuild an array.
You will know that a logical drive is critical by looking at the Operational Status in the Logical Drive Information
display.
To begin rebuilding the drive, go to the Local Host menu, the Background Activities and move the cursor to
select Start Rebuild. A new menu appears.
TroubleshootingVess A6000 Series Storage Appliance for Video Surveillance