42
Background Synchronization Rate
1. To change Background Synchronization Rate setting the in Background Activities Settings menu: Click the
Synchronization Rate drop-down menu and choose a rate:
• Low – Fewer system resources to Synchronization,
more to data read/write operations.
• Medium – Balances system resources between
Synchronization and data read/write operations.
• High – More system resources to Synchronization,
fewer to data read/write operations.
2. Click the Submit button.
logiCAl DriVe initiAlizAtion
Technically speaking, Initialization is a foreground activity, as you cannot access a logical drive while it is
initiating.
Initialization is normally done to logical drives after they are created from a disk array. Initialization sets all data
bits in the logical drive to zero. The action is useful because there may be residual data on the logical drives left
behindfromearliercongurations.Forthisreason,Initializationisrecommendedwheneveryoucreatealogical
drive.
Logical Drive Initialization Rate
To change Logical Drive Initialization Rate setting the in Background Activities Settings menu:
1. Click the Logical Drive Initialization Rate drop-down menu and choose a rate:
• Low – Fewer system resources to Initialization, more to data read/write operations.
• Medium – Balances system resources between
Initialization and data read/write operations.
• High – More system resources to Initialization, fewer to data read/write operations.
2. Click the Submit button.
Managing with the Web ManagerVess A6000 Series Storage Appliance for Video Surveillance