TR515/TR510. If resetting can’t solve the problem, contact GIGA-TMS for
the latest firmware to update firmware for TR515/TR510. If it doesn’t
work after resetting and updating firmware, send the time recorder to
GIGA-TMS for further inspection.
4. If the display of TR515/TR510 shows “Err6”
See “10. If you want to reset TR515/TR510” in the section “About
Software (TR515 Tool/TR510 Tool)” of this document to reset
TR515/TR510. If resetting can’t solve the problem, contact GIGA-TMS for
the latest firmware to update firmware for TR515/TR510. If it doesn’t
work after resetting and updating firmware, send the time recorder to
GIGA-TMS for further inspection.
5. If the display of TR515/TR510 shows “Err7”
See “10. If you want to reset TR515/TR510” in the section “About
Software (TR515 Tool/TR510 Tool)” of this document to reset
TR515/TR510. If resetting can’t solve the problem, contact GIGA-TMS for
the latest firmware to update firmware for TR515/TR510. If it doesn’t
work after resetting and updating firmware, send the time recorder to
GIGA-TMS for further inspection.
About Software (DS Manager) – For Ethernet
Interface Type, not for RS232 Interface Type
1. If you can’t find your TR515/TR510 on the “Auto-Discovery” list of the
software DS Manager
Make sure TR515/TR510 is powered on.
Make sure TR515/TR510 is connected with Hub via “WAS-1499” cable.
Make sure the firewall and antivirus program in your computer are
disabled before using the software.
Change the other computer to try.
To Next Page
Loading...