ULTRA 3 INSTRUCTION MANUAL
16
Location
The Ultra 3 must be mounted in a non-hazardous (safe) area, and the
transducer fitted in the hazardous area
When choosing a location to mount the enclosure, bear in mind the
following:
• Ensure that the Ultra 3 is installed in a “Safe”, non-hazardous area.
• For a clear view of the LCD display, it is recommended that it is
mounted at eye level.
• The mounting surface is to be vibration free.
• The ambient temperature is between -20°C and 50°C.
• There should be no high voltage cables or inverters nearby,
Important Information
All electronic products are susceptible to electrostatic shock, so follow proper
grounding procedures during installation.
To Next Page
Loading...
Need help?
General