To Next Page

To Previous Page

ULTRA 3 INSTRUCTION MANUAL

170

P979 End Month

This parameter is used to select the month, in which Daylight-Saving Time

will end.

OPTION

DESCRIPTION

1= January

DST will end during the month of January

2= February

DST will end during the month of February

3=March

DST will end during the month of March

4= April

DST will end during the month of April

5= May

DST will end during the month of May

6= June

DST will end during the month of June

7= July

DST will end during the month of July

8= August

DST will end during the month of August

9= September

DST will end during the month of September

10= October (Default)

DST will end during the month of October

11= November

DST will end during the month of November

12= December

DST will end during the month of December

Device Comm.

RS232 Set Up

P061 Comms Baud

This parameter is used to set the speed (Baud Rate) of the RS232

communications and can be changed to suit the connecting device.

Default = 19200

RS 485 Set Up

Please refer to the RS485 communications manual for availability of

parameters and details of their options. This can be found in the downloads

section of the Pulsar website:

https://pulsarmeasurement.com/downloads/instruction-manuals/

Pulsar Measurement Ultra 3 User Manual

Questions and Answers: