ULTRA 3 INSTRUCTION MANUAL
46
CHAPTER 5 LEVEL / VOLUME
When Ultra Wizard = 1 Level/Volume
Ultra 3 is configured as a Level Star 3
This quick set-up guide shows you how to get up and running within a few
minutes of installing your Level Star 3.
Before proceeding ensure that the Ultra Wizard = 1 Level/Volume (Level
Star 3). For further details, see Chapter 4 Ultra Wizard.
Enter Program Mode
First you need to go from run mode into program mode. Assuming the
passcode is the default 1997, then you should enter this.
Choose Quick Setup
Now you need to go into the quick setup. You will see on the display the
words ‘Ultra Wizard’, press the ‘right hand’ arrow key and this will take you
to the ‘Quick Setup’ menu option. Try pressing either of the two arrow keys
to see some more menu options, but return to Quick Setup, and press
This takes you to the common applications
menu, and several options will appear on the
display.
To Next Page
Loading...
Need help?
General